A+ Core 1 PBQ 4: PC Hardware & BIOS Configuration

Scenario

A desktop upgrade requires additional memory, a new NVMe SSD, and a BIOS/UEFI configuration review. After the upgrade, the system should boot from the NVMe drive, support virtualization labs, and protect boot integrity.

Your task: Select the correct components and firmware settings.

1. Desktop motherboard memory form factor:

2. Laptop memory form factor:

3. Common connector/slot for NVMe SSD:

4. Firmware setting to start from the new SSD:

BIOS/UEFI and Safety

5. Firmware feature needed for virtual machines:

6. Firmware feature that helps protect boot integrity:

7. Best ESD protection before installing RAM/SSD:

8. CPU overheating after replacement most likely requires:

Instructor Answer

Desktop RAM typically uses DIMM; laptop RAM typically uses SODIMM.
NVMe SSDs commonly use the M.2 form factor/interface on modern systems.
Set the proper boot order/boot option in BIOS/UEFI.
Enable virtualization support for VM labs.
Enable Secure Boot when appropriate to protect boot integrity.
Use ESD protection before handling internal components.
Overheating after CPU work points to heat sink, fan, thermal paste/pads, or airflow issues.